Haltech

Plug and Pins Only - 12 Pin Tyco Suits: DRA Digital Reluctor Adaptor. Includes: Pack of 12 Pins.

Plug and Pins Only - 8 Pin Black Tyco Suits: Platinum Series ECU and CAN Hub Connector. Includes: Pack of 8 Pins.

Plug and Pins Only - AMP 26 & 34 Pin 4 Row 3 Keyway Superseal Connector Set Suits: E8/11, PS1000/2000 and Elite 1000-2500 ECUs.

Turbosmart GenV eWG60 Powergate 60Diameter: 60mm Notes: Starting with a Turbosmart's GenV wastegate body, you can be confident the mounting orienta...

Turbosmart GenV eWG45 Hypergate 45Diameter: 45mm Notes: Starting with a Turbos Mart's Gen V wastegate body, you can be confident the mounting orien...

CO2 Boost Control Dual Solenoid & Pressure Sensor KitThread: 1/8 NPT Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wasteg...

Boost Control Solenoid 4 PortThread: 1/8 NPT Includes: 1 x Boost Control Solenoid 4 Port 4 x 1/8NPT to 5/15 Barb 1 x Brass Vent 1 x DTM2 Connector ...

Boost Control Solenoid 3 Port 33HzThread: 1/8 NPT Includes: Hose fittings, rubber isolated mount and matching Set of Deutsch DTM 2 Connectors (HT-0...

Plugs and Pins Only - Suit Idle Air Control Motor 2 Screw Style

Idle Air Control Kit - Billet 2 Port Housing With 2 Screw Style MotorDiameter: 10mm (3/8")   Includes: Matching plugs and pins.

High Output CDI Coil Includes: Matching Delphi plug and pins.

Plugs and Pins Only - Suit High Output IGN-1A Inductive Coil with built-in Ignitor

High Output IGN-1A Inductive Coil with built-in ignition module Includes: Matching plug and pins. IGN1A

High Output Inductive Coil Suits: Haltech range of HPI High Power Igniters. Includes: Matching Delphi plug and pins. Notes: Must be used with an ig...

Hitachi "R35" Ignition CoilLength: 140mm ( Overall ) Suits: Coil on plug Conversions Includes: 1 x Genuine Hitachi Ignition Coil 1 x Plug and Pin Set

Plugs and Pins Only - Suit LS1 Coil Includes: connector , seals and terminals

LS1 Coil with built-in Ignitor Includes: Matching plug and pins.

HPI8 - High Power Igniter - 15 Amp Eight Channel Flying Lead KitLength: 2.0m (78")                                                                 ...

Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins.

HPI8 - High Power Igniter - 15 Amp Eight Channel Module Only

HPI6 - High Power Igniter - 15 Amp Six Channel Flying Lead KitLength: 2.0m (78") Includes: Flying Lead harness.

HPI6 - High Power Igniter - 15 Amp Six Channel with Plug & Pins Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins.

HPI6 - High Power Igniter - 15 Amp Six Channel Module Only

HPI4 - High Power Igniter - 15 Amp Quad Channel Flying Lead KitLength: 2.0m (78") Includes: Flying Lead harness.

HPI4 - High Power Igniter - 15 Amp Quad Channel with Plug & Pins   Includes: Matching AMP 26 Pin 2 Row Superseal Connector and pins.

HPI4 - High Power Igniter - 15 Amp Quad Channel Module Only

Thermal Paste - Suits all OEM ignition Igniters

Triple Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Dual Channel OEM Igniter (DUMB) Includes: Mounting bracket, thermal paste and matching plug and pins.

Bosch - DBW Pedal Assembly Suits: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW) Includes: DBW Pedal Assembly an...

Bosch 82mm Electronic Throttle Body - Includes connector and pinsDiameter: 82mm Suits: Nexus and Elite VCU's and ECU's that support Drive by Wire T...

Bosch 74mm Electronic Throttle Body - Includes connector and pinsDiameter: 74mm Suits: Nexus and Elite VCU's and ECU's that support Drive by Wire T...

Bosch 68mm Electronic Throttle Body - Includes connector and pinsDiameter: 68mm Suits: Nexus and Elite VCU's and ECU's that support Drive by Wire T...

Suits: Nexus and Elite VCU's and ECU's that support Drive by Wire Throttle Control (DBW) Includes: 60mm Bore Size Electronic Throttle Body and mati...

Includes: 1 x Driveshaft Split Collar 2.187"\ 55.55mm I.D. 8 Magnet Notes: 8 magnet pickup split collar - suits 2.187" Driveshaft

Includes: 1 x Driveshaft Split Collar 2.125"/ 53.98mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 2.125" / 53.98mm...

Includes: 1 x Driveshaft Split Collar 1.875"/ 47.63mm I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup collar - suits 1.875"/ 47.63mm Drives...

Includes: 1 x Drive Shaft Split Collar 1.812" I.D. 8 Magnet 1 x 5/32 Allen Key Notes: 8 magnet pickup split collar - suits 1.812" / 46mm Driveshaft

Suits: Haltech Nexus and Elite ECU's using NSP and ESP Software Includes: 1 x Haltech TMS-4 Receiver 1 x TE Mcon to DTM-4 CAN Cable 4 x External Se...

Suits: Haltech Nexus and Elite ECU's using NSP and ESP Software Includes: 1 x Haltech TMS-4 Receiver 1 x TE Mcon to DTM-4 CAN Cable 4 x Internal Se...

Suits: NEXUS and Elite devices only Includes: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Labe...

Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label...

Suits: Haltech CAN Keypads Includes: 5 Label Sheet (140 individual labels) Notes: A selection of pre designed, semi transparent labels to suit the ...

Suits: NEXUS R5 Includes: 1 x Glass Mount Wi-Fi Antenna. 1.5m lead. Notes: For increasing signal strength when standard Wi-Fi antenna is shielded b...

Suits: Nexus Series Includes: 1 x 108mm Stubby Wi-Fi Antenna 2.4Ghz

Outputs: 0V to 12V Pulsed Output Suits: Applications that require a digital speed signal Includes: Includes: GPS Speed Input Module & GPS Anten...

Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting ...

Suits: All Haltech Linear Position Sensors Includes: 1 x Split Collar , 1 x #8-32 / 1 x #10-32 Machine Bolts Notes: Includes Nylon sensor mounting ...