Haltech

Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 c...

Includes: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.

Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.

Suits: Nexus ECU, Elite Pro Plugin ECU and WB1/WB2 Includes: Bosch LSU 4.9 sensor with Factory calibration resistor connector (not a Deutsch DT-6 c...

Includes: Pre-terminated with female Deutsch DT-6 connector.

Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA09-E1 Wideband Sensor

Suits: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. Includes: 1 x NTK LZA08-H5 Wideband Sensor Notes: Genuine NTK sensor

Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug.

Suits: M18 Thread Oxygen Sensors Includes: 1 x 6061 Aluminum Weld On Bung

Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014

Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

Suits: Wheel Speed, Crank/Cam etc. Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)

Rare Earth MagnetsSize: 5mm Diameter x 2mm Height

Includes: Triple panel and yellow and red adjustment knobs. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 3 x HT-010504 if ...

Includes: Dual panel and yellow adjustment knob. Notes: 12 Position Rotary Trim Modules are NOT included, Please order 2 x HT-010504 if required.

Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)

Suits: CW & CCW Rotation Includes: Matching Set of Deutsch DTM-3 Connectors (HT-031014)

Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Black Counter Clockwise Rotation 1 x Opposing Connector 3 x Pins Notes: Counter Clockwis...

Suits: 8mm D-Shaft Includes: 1 x Throttle Position Sensor -Grey Clockwise Rotation 1 x Opposing Connector 3 x Pins

Suits: Coolant Temp Sensor - Small Thread

Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading.

Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread.

Includes: 1 x 1/8 NPT Weld on fitting

Includes: Matching male Deutsch DTM-2 Connector (HT-031000) Notes: 127 deg C (260 F) Max reading.

Suits: Nissan Z32 300ZX intake. Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading.

Includes: Matching Delphi plug and 3 pins. Notes: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they must be remote mo...

Suits: Air Temp Sensor - Small Thread.

Outputs: Up to 6 injector and 6 ignition. Suits: Universal 1-12 cylinder or 2-3 rotor applications. Includes: Elite 750 ECU, Basic Universal Wire-I...

Includes: Elite 750 ECU Plug and Pin set to suit

Suits: Elite 1500 Elite 2500 Elite 2500T Includes: Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins f...

Suits: Plug 'n' Play replacement of the factory ECU for Mitsubishi EVO 9 (All Regions) EVO 8 MR (6 Speed) (JDM Only, excludes USDM) Manual transmis...

Suits: Plug 'n' Play replacement of the factory ECU for MY95-97 Toyota LandCruiser 80 Series with 1FZ-FE and manual transmission only. Supports sub...

Suits: Nissan Skyline R34 GT-T, Stagea WC34 Series. Includes: Injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor wit...